Initial commit: combine nas_tool, nas_webdav, sync-utils

2026-02-18 22:59:43 +08:00
commit 526c6a5521
77 changed files with 7898 additions and 0 deletions
@@ -0,0 +1,124 @@
+# iPhone Proxy Setup Guide
+
+## Prerequisites
+- ✅ Tailscale installed and connected on iPhone
+- ✅ server2 proxy running at `100.70.115.1`
+
+## Option 1: System-Wide Proxy (Limited Support)
+
+iOS has limited system-wide proxy support. This works for some apps but not all browsers.
+
+### Steps:
+1. Open **Settings** → **Wi-Fi**
+2. Tap the **ⓘ** icon next to your connected Wi-Fi network
+3. Scroll down to **HTTP Proxy**
+4. Select **Manual**
+5. Configure:
+   - **Server:** `100.70.115.1`
+   - **Port:** `7890` (HTTP) or `7892` (Mixed)
+   - **Authentication:** Off
+6. Save
+
+**Note:** This only works when connected to that specific Wi-Fi network. It won't work on cellular or other Wi-Fi networks.
+
+## Option 2: Proxy App (Recommended)
+
+**⚠️ Important: VPN Conflict Solution**
+
+iOS only allows **one VPN connection** at a time. Since Tailscale uses VPN mode, you have two options:
+
+### Solution A: Use Shadowrocket in Proxy Mode (Recommended)
+
+Shadowrocket can work **WITH Tailscale** if configured correctly:
+
+1. **Keep Tailscale ON** (for network access)
+2. Install **Shadowrocket** from App Store
+3. Open Shadowrocket
+4. Tap **+** (Add Server)
+5. Select **HTTP** (not VPN mode)
+6. Configure:
+   - **Type:** HTTP
+   - **Address:** `100.70.115.1` (Tailscale IP)
+   - **Port:** `7890`
+   - **Name:** server2-proxy
+7. Tap **Done**
+8. **Important:** In Shadowrocket settings:
+   - Go to **Settings** → **Proxy**
+   - Enable **"Use Proxy"** but **DO NOT enable VPN mode**
+   - Or use **"Proxy" mode** instead of **"VPN" mode**
+9. Enable the proxy
+
+**How it works:** Shadowrocket routes traffic through the proxy, but uses Tailscale's VPN connection to reach the proxy server. Both work together!
+
+### Solution B: Use Shadowrocket VPN Mode (Disable Tailscale)
+
+If you need Shadowrocket's VPN mode:
+1. **Disable Tailscale** temporarily
+2. Use Shadowrocket in VPN mode
+3. Shadowrocket will handle both VPN and proxy routing
+
+**Note:** You'll lose direct Tailscale network access, but can still reach server2 via proxy.
+
+### Surge (Paid, ~$10)
+Similar setup process - supports more advanced features.
+
+### Potatso Lite (Free)
+1. Install **Potatso Lite**
+2. Add proxy with same settings
+
+## Option 3: Safari Browser Extension
+
+Some browsers support proxy extensions, but iOS Safari doesn't support system proxies well.
+
+## Option 4: Clash Client for iOS
+
+If you want to use Clash directly on iPhone:
+
+### Clash Meta for iOS (Stash)
+1. Install **Stash** from App Store (or use TestFlight)
+2. Add your server2 as an HTTP proxy
+3. Configure routing rules
+
+## Quick Test
+
+After setup, test if proxy is working:
+
+1. Open Safari or your browser
+2. Visit: https://api.ipify.org
+3. It should show server2's IP: `158.101.140.85` (not your iPhone's IP)
+
+Or visit: http://100.70.115.1:9090/ui to see Clash dashboard
+
+## Recommended Setup
+
+**Best Solution: Use Both Together**
+- **Keep Tailscale ON** (for network connectivity)
+- Use **Shadowrocket in Proxy mode** (not VPN mode)
+- Configure HTTP proxy: `100.70.115.1:7890`
+- Shadowrocket will route through Tailscale's connection
+- Works on both Wi-Fi and cellular
+
+**Alternative: Use Shadowrocket VPN Mode**
+- Disable Tailscale when using Shadowrocket VPN mode
+- Shadowrocket handles both VPN and proxy
+- You'll need to manually switch between them
+
+## Troubleshooting
+
+### VPN Conflict?
+- **If both Tailscale and Shadowrocket show VPN icons:** You can only have one active
+- **Solution:** Use Shadowrocket in **Proxy mode** (not VPN mode) while Tailscale is active
+- **Or:** Disable Tailscale and use Shadowrocket VPN mode
+
+### Can't connect?
+1. Verify Tailscale is connected on iPhone (needed to reach `100.70.115.1`)
+2. Check Tailscale status: Open Tailscale app, verify you see "oracle-tokyo" device
+3. Test connection: Open Safari, visit `http://100.70.115.1:9090/ui`
+4. If dashboard loads, proxy is reachable via Tailscale
+
+### Proxy not working?
+1. Check if proxy app is enabled/running
+2. Verify server2 is online: `ssh server2 'sudo systemctl status clash-meta'`
+3. Try different port: 7890 (HTTP), 7891 (SOCKS5), or 7892 (Mixed)
+4. Make sure Tailscale is connected (required to reach the proxy server)
+