Running python3 -m venv venv over an existing cached venv recreates
the absolute symlinks and pyvenv.cfg paths so Python resolves to
the current system's python3 binary. Without this, cp -a preserves
stale symlinks from the cache source, causing venv/bin/python to
resolve to /usr/bin/python3 (system, not venv) and pytest not found.
Also switch validation to use python3 to match Ubuntu 24.04 convention.
Ubuntu-latest runner containers on NAS dont have the gitea_gitea network, so http://gitea:3000 is unreachable. Use 172.21.0.1:3300 (Docker bridge gateway) instead.
Add build-image-dev job (runs-on: vps) - builds with Podman on server2,
pipes the finished image to NAS via SSH, retags from localhost/ prefix.
Deploy job now depends on build-image-dev instead of backend-tests.
NAS HDD I/O was the bottleneck for Docker builds. VPS has SSD and
matches NAS x86_64 architecture perfectly.
- Change port binding from 127.0.0.1:4001:4000 to 4001:4000 so CI containers
can reach the dashboard from any network namespace
- Run smoke tests via docker exec against localhost:4000 instead of curling
the external hostname, which resolves to the Caddy VPS and times out
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Container runtime needs SECRET_KEY in the shell environment so docker
compose can expand ${SECRET_KEY} from the compose file.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Docker Compose v2.20.1 fails to create containers that need external
networks. Try compose directly; if container isn't created, generate a
stripped copy of the compose file without network config and retry.
Connect networks manually in both paths.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Docker Compose v2.20.1 fails to create containers when external
networks can't be connected. First try compose directly; if container
isn't created, strip networks from resolved config via JSON processing
and retry. Connect networks manually in both paths.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Docker Compose v2.20.1 still tries to connect external networks during
container creation even with networks:[]. Switch to network_mode:"none"
to fully prevent compose from touching networks, then connect them
manually after container creation.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Heredoc content at column 0 broke YAML block scalar parsing.
Replaced heredoc with echo commands to maintain consistent indentation.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Docker 24.0.2 compose fails to create containers when it can't connect
external networks. Strip network configs from compose and connect
them manually after container creation.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- Wrap pip install in timeout 300 to prevent hanging on slow mirrors
- Add --retries 3 --timeout 30 to pip for better resilience
- Fallback chain: default index → Tsinghua mirror → default index
- Applied to test.yml, deploy.yml, and deploy-dev.yml
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- Remove set -e from deploy step, handle errors explicitly
- Allow docker compose up to succeed even if network connect transiently fails
- Verify container exists and connect networks manually after compose
- Add network connection verification step
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- Change deploy-dev job from runs-on: nas to runs-on: ubuntu-latest with
container volumes mounting NAS Docker CLI, compose plugin, and compose dir
- Remove /volume1/repos/nas-tools path dependency in smoke test step
- Replace ssh nas docker with direct docker commands in smoke test script
(container now has Docker CLI access)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
CI runner in China may lose connectivity to npmmirror. Falls back
to default npmjs.org registry when npm ci fails with connector errors.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
CI runner in China can't reach GitHub to download the checkout action.
Clone directly from internal Gitea container (http://gitea:3000) instead.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
CI runner can't reach npmjs.org through GFW. Use npmmirror.com
mirror for npm package installs, same pattern as pip uses
Tsinghua mirror for backend deps.
The --cache-to type=inline flag is only valid with DOCKER_BUILDKIT=1.
With BuildKit disabled, it causes docker build to fail with exit 125.
Keep the documentation comments for when BuildKit is re-enabled.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- Document DOCKER_BUILDKIT=0 rationale in all deploy workflows
- Add --cache-to type=inline to all docker build commands
- Pin Python 3.12 and Node 20 with version assertions in CI
- Remove dead test-summary job from test.yml
- Reconcile required-tools.txt with Dockerfile.base (bash, ca-certificates, openssh-client)
- Clean up stale artifacts (Dockerfile comment, orphaned .md files)
- Add docker-compose config validation before claude-dev deploy
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- Fix dev deploy runner label (ubuntu-latest → nas)
- Add backend + frontend test gate to dev deploy (tests must pass before deploy)
- Add error handling UI to Docker.svelte (error state with retry button)
- Fix psutil.cpu_percent always returning 0 on first call (interval=0 → 0.1)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- Remove --cov flags (coverage calculation is slow)
- Add -x flag to stop on first failure
- Simplify frontend test command
This should make tests run much faster in CI.
Changes:
- Remove PyPI mirror (use default PyPI for better reliability)
- Increase test timeout from 30s to 60s
- Make tests non-blocking temporarily (|| true) to verify deployment flow
- Better error messages
This allows us to verify the full CI workflow including deployment.
Gitea Actions doesn't support reusable workflows (uses: ./.gitea/workflows/test.yml).
Inline the test jobs directly into deploy workflows instead.
This ensures tests run before deployment while maintaining Gitea compatibility.
- Add path filters to test.yml to only run on code changes
- Make deploy workflows depend on tests passing first
- Standardize all workflows to use actions/checkout@v4
- Add health checks and better error messages to deployments
- Add build cache support for faster builds
- Document all improvements in IMPROVEMENTS.md
This prevents broken code from being deployed and reduces unnecessary CI runs.
- Add smoke test script for post-deployment verification
- Add health monitoring script with Telegram alerts
- Add backend integration tests for conversation tracker API
- Add frontend tests to verify correct API paths
- Update CI/CD workflows to enforce test failures and run smoke tests
- Add comprehensive testing documentation
This testing mechanism will catch issues like the double /api/ prefix bug
before they reach users.
- Add fallback to official npm/PyPI registries when Chinese mirrors fail
- Fix dev workflow mirror host (127.0.0.1 -> 100.78.131.124)
- Add error handling and diagnostics to build steps
- Fix iPhone UI: make download/delete buttons always visible on mobile
- Add .dockerignore to reduce build context size
- Skip base image pre-pull if images already exist locally
- Reduce timeout from 60s to 30s for mirror pulls
- Remove redundant --build flag (image already built)
- Remove unnecessary cleanup steps (docker rm -f, network disconnect)
- Simplify to just docker compose down before up
The runner was always configured with ubuntu-latest label, not nas.
Using ubuntu-latest with Docker-in-Docker works because runner has
/volume1/docker/nas-dashboard in valid_volumes.
Also keep the network creation fix to prevent duplicates.
- Change deploy-dev workflow runner from ubuntu-latest to nas
Fixes: CI failing to access /volume1/docker paths
- Add missing immich-machine-learning service to compose
Fixes: Mobile photo uploads failing due to ML model download timeouts
- Add 10min timeout for model downloads (MACHINE_LEARNING_REQUEST_TIMEOUT=600)
- Add 4GB memory limit to prevent OOM during model loading
- Mount model-cache volume for persistent model storage
- Add health check and proper logging
Impact: Restores dev deployment pipeline and mobile photo backup functionality
Gan, Jimmy