# Shadowrocket Proxy Mode Setup Guide

## Understanding Shadowrocket Modes

Shadowrocket has two main modes:
1. **VPN Mode (TUN Mode)** - Creates a VPN connection (conflicts with Tailscale)
2. **Proxy Mode** - Routes traffic through proxy without VPN (works with Tailscale) ✅ **Use This!**

## Reference Article
For additional details, see: https://privateproxy.me/blog/how-to-use-proxies-with-shadowrocket/

## Step-by-Step: Enable Proxy Mode

### Step 1: Install Shadowrocket
- Download from App Store (~$3)
- Open the app

### Step 2: Add Your Proxy Server

1. Open Shadowrocket app
2. Tap the **"+"** button in the top right corner
3. You'll see different server types - select **"HTTP"** or **"HTTPS"**

### Step 3: Configure Proxy Settings

Fill in the details:
- **Type:** HTTP (or HTTPS)
- **Remark:** `server2-proxy` (or any name you prefer)
- **Address:** `100.70.115.1` (your Tailscale IP)
- **Port:** `7890` (HTTP) or `7892` (Mixed port)
- **Username:** (leave empty)
- **Password:** (leave empty)
- **Method:** (leave as default)

4. Tap **"Done"** or **"Save"**

### Step 4: Enable Proxy Mode (NOT VPN Mode)

**This is the critical step!**

1. In Shadowrocket main screen, you'll see your proxy server listed
2. Tap on your proxy server to select it
3. **Important:** Look for these settings:

   **Option A: Global Routing Mode**
   - Tap the three dots (⋯) or "Edit" next to your proxy
   - Look for **"Routing"** or **"Mode"** setting
   - Select **"Proxy"** or **"Global Proxy"** (NOT "VPN" or "TUN")
   
   **Option B: Settings Menu**
   - Go to **Settings** (gear icon at bottom)
   - Find **"Proxy"** or **"Routing"** section
   - Enable **"Use Proxy"** 
   - Make sure **"VPN" mode is OFF** or **"TUN" mode is OFF**
   - Select **"Proxy Mode"** instead

### Step 5: Enable the Connection

1. Go back to main screen
2. Find the toggle switch at the top
3. **Toggle it ON**
4. You should see a checkmark next to your proxy server
5. **Important:** You should NOT see a VPN icon in status bar (that means VPN mode is active)

### Step 6: Verify It's Working in Proxy Mode

**Check for VPN icon:**
- ✅ **Correct:** No VPN icon in status bar = Proxy mode active
- ❌ **Wrong:** VPN icon appears = VPN mode active (will conflict with Tailscale)

**Test the connection:**
1. Open Safari
2. Visit: https://api.ipify.org
3. Should show: `158.101.140.85` (server2's IP)

## Alternative: Using Configuration File

If the UI is confusing, you can use a config file:

1. In Shadowrocket, tap **"Config"** tab at bottom
2. Tap **"+"** to add new config
3. Create a config with:

```yaml
# Shadowrocket Config
[Proxy]
server2 = http, 100.70.115.1, 7890

[Rule]
FINAL,server2
```

## Troubleshooting

### Problem: VPN icon appears (conflicts with Tailscale)
**Solution:**
- Go to Settings → Routing
- Disable "TUN Mode" or "VPN Mode"
- Enable "Proxy Mode" only
- Restart Shadowrocket

### Problem: Can't connect to proxy
**Check:**
1. Is Tailscale connected? (Required to reach 100.70.115.1)
2. Is server2 online? `ssh server2 'sudo systemctl status clash-meta'`
3. Try different port: 7890, 7891, or 7892

### Problem: Some apps don't work
**Solution:**
- Some iOS apps ignore system proxy
- You may need to use Shadowrocket's VPN mode for those apps
- But then you'll need to disable Tailscale temporarily

## Visual Guide Reference

Look for these in Shadowrocket:
- **"Proxy"** or **"HTTP Proxy"** option (use this)
- **"TUN"** or **"VPN"** option (avoid this when Tailscale is on)
- **"Global Proxy"** or **"Proxy Mode"** (this is what you want)

## Key Differences

| Mode | VPN Icon? | Works with Tailscale? | Use Case |
|------|-----------|----------------------|----------|
| **Proxy Mode** | ❌ No | ✅ Yes | Use this! |
| **VPN Mode** | ✅ Yes | ❌ No | Only when Tailscale is off |

## Quick Checklist

- [ ] Tailscale is ON and connected
- [ ] Added HTTP proxy: `100.70.115.1:7890`
- [ ] Enabled "Proxy Mode" (NOT VPN mode)
- [ ] Toggle switch is ON
- [ ] No VPN icon in status bar
- [ ] Test: Visit https://api.ipify.org shows server2 IP